What I Can Teach You About Maintenance

Clad Metals

Clad metals are basically two distinct metals that come to be metallurgically bonded together with the key intent being to achieve the best possible mix of the useful characteristics. Clad metals can be designed in lots of various forms and these are such as wires, rods, sheets, plates and tubes. This technique, cladding metals, can verily be applied on a number of the engineering metals. The one benefit that cladding allows is that of enabling for the designing such a metal that has unique characteristics that cannot be found in a single material.

Looking at the processes that can be used to come up with the clad metals, these are as well quite a number and they include such as co-rolling, casting, co-extrusion, diffusion bonding, heavy chemical deposition, heavy electroplating, and welding. An industry that has quite benefitted from the cladding technology or processes has been the jewelry industry as they have effectively used it to come up with blends of the precious metals and the strength qualities of the low cost base metals. There are two basic kinds of the clad metals and these are the inlay clads and the overlay clads. The following is a look at some of the description of the two kinds.

Looking at the inlay clads, these are basically some of the types of the clad metals that happen to be so sophisticated. This is majorly considering the fact that using an inlay, a designer will be able to amalgamate materials such as palladium, gold, silver, and platinum that are so precious with the less costly ones such as brass, stainless steel and copper. It is one cladding technology that is loved for the fact that it allows you to have the properties of the precious metals right where you want them. Comparing inlay cladding and selective plating, inlay cladding has a number of benefits over the selective plating technique.

One is the fact that this method will not discriminate the use of any alloy and guarantees a highly consistent composition and as well will get you the freedom to use several alloys that would not be plated ordinarily. The qualities of the clad metals assures of bond quality to its uttermost. The use the precious metals can as such be limited and applied selectively so as to end in great savings.

As for the overlay cladding of metals, this is a method that allows you to have dissimilar layers of metals to be bonded together. It is a technique that sees the use of adhesives and filler materials.

If You Think You Understand Maintenance, Then This Might Change Your Mind

How I Achieved Maximum Success with Metal

Editor
Editor